EVERSUN Machinery (Henan) Co., Ltd
China's leading manufacturer of screening and conveying equipment
Add to Cart
Product introduction
Stainless Steel Two Cylinders High-Efficiency V Type Powder Mixer For Ceramic
V type mixer can be used for uniform mixing of granular and dry powder materials.It is mainly composed of motor, reducer, belt, cylinder, control panel, coupling, butterfly valve outlet,therefore, the machine is simple and easy to operate.The operation of the machine is closed, and it is convenient to enter and exit the material,therefore,during the mixing process,it doesn't produce volatilization ,dissolution or deterioration of materials.
Technical parameters
| Model | Maximum loading(L) | Total volume(L) | Diameter(mm) | Power(kw) | Auxiliary stirring power(kw) |
| V-20 | 10 | 20 | 200 | 0.37 | 0.37 |
| V-30 | 15 | 30 | 250 | 0.37 | 0.37 |
| V-50 | 25 | 50 | 350 | 0.55 | 0.37 |
| V-70 | 35 | 70 | 400 | 0.75 | 0.37 |
| V-100 | 50 | 100 | 500 | 1.5 | 0.37 |
| V-200 | 100 | 200 | 550 | 2.2 | 0.5 |
| V-500 | 250 | 500 | 600 | 3 | 0.75 |
| V-1000 | 500 | 1000 | 650 | 5.5 | 1.1 |
| V-1500 | 750 | 1500 | 850 | 7.5 | 1.5 |
| V-2000 | 1000 | 2000 | 1000 | 11 | 2.2 |
| V-3000 | 1500 | 3000 | 1200 | 15 | 3 |
| V-5000 | 2500 | 5000 | 1350 | 22 | 5.5 |
| V-10000 | 5000 | 10000 | 1750 | 37 | 11 |
| More model can be customized based on your need | |||||
Use method
The use method of V-type mixer, in the case of running with material, first open the feed port of the mixer, and confirm whether the feed port is closed, according to the process control requirements of V-type hopper into the specified amount of materials. After feeding, in order to prevent the material outflow when mixing, the feeding port should be closed and locked. The next is the working time of the machine. Switch on the power button, rotate the stop button to the left, start the reverse button of the mixer, and adjust the motor speed for mixing within the speed specified by the process. When the mixing feed reaches the time specified by the process, stop the machine by adjusting the motor speed button. When stopping, the discharging port of the mixer should be facing the ground, and the adjusting motor speed button should be adjusted to 0. The V-type mixer will rotate the stop button to the right and cut off the power supply. Finally, the feeding is: open the feeding port of V-type mixer, and load the material with the specified container at the feeding port until the material in the hopper is exhausted.